胖肚移液管

Discover BRAND bulb pipettes for transferring solutions, taking samples and many other applications.

设置降序方向
  1. 胖肚移液管, BLAUBRAND®, AS级, 单刻度, AR-GLAS®, DE-M
    胖肚移液管, BLAUBRAND®, AS级, 单刻度, AR-GLAS®, DE-M

    从… RMB 491.00

    Excl. 19% VAT
  2. 胖肚移液管, BLAUBRAND®, AS级, 双刻度, AR-GLAS®, DE-M
    胖肚移液管, BLAUBRAND®, AS级, 双刻度, AR-GLAS®, DE-M

    从… RMB 685.00

    Excl. 19% VAT
  3. 胖肚移液管, SILBERBRAND ETERNA,B级, AR-GLAS®
    胖肚移液管, SILBERBRAND ETERNA,B级, AR-GLAS®

    从… RMB 376.00

    Excl. 19% VAT
  4. 胖肚移液管, PP
    胖肚移液管, PP

    从… RMB 1,510.00

    Excl. 19% VAT
视图 %1及以上 列表

6 项目

每页
设置降序方向

BRAND胖肚移液管提供最高的精准度。严格的统计学质量控制确保产品保持极高的水 准。

所有BLAUBRAND® 胖肚移液管都随原厂包装提供批号以及批次认证证书。根据要求,也可提供个体检验证书、USP 个体检验证书或DAkkS校准证书。(关于批次证书

DIN EN ISO 648

在最新的DIN EN ISO 648 标准中,AS级单刻度移液管的等待时间从1 5 秒减少到5秒。

DIN EN ISO 648

In the DIN EN ISO 648 the waiting time for bulb pipettes class AS has been reduced from 15 to 5 seconds.

常见问题 (胖肚移液管)

What is the difference between class A and AS?

Class A and AS refer always to highest quality grade in accord to the respective standards and 'S' stands for swift delivery only used for volumetric instruments calibrated to deliver, pipettes and burettes (TD, Ex). For volumetric instruments calibrated to contain (TC, In) a swift delivery is not necessary and therefore not defined in the respective standards.

There is a small amount of residual liquid in the tip. Should it be blown out or not?

No. The small amount of residual liquid must not be blown out as it is already taken into account during calibration of the bulb or graduated pipettes.

How can the meniscus be read easily?

The volume of a concave meniscus has to be read at the lowest point of the liquid level. Here the lowest point of the meniscus has to touch the upper edge of the graduation mark. For parallax-free adjustment of the meniscus, the burette is held upright and the observer's eye must be at the same height as the meniscus. In this position the ring mark will appear as a line. The meniscus will appear darker and more easily readable in front of a light background if a piece of dark paper is held behind the instrument immediately beneath the ring or graduation mark.

What are BLAUBRAND® and SILBERBRAND pipettes labeled with?

Every BLAUBRAND® and SILBERBRAND bulb or graduated pipette is labeled with the nominal capacity, unit symbol (ml), error limit (± ml), calibration temperature (20 °C), calibration type (Ex), Class (AS or B), country of origin (Germany), color code, manufacturer's trademark (BLAUBRAND or SILBERBRAND) or companies name or logo (BRAND), as well as with standard referring to (ISO 648 or 835) and inscription ETERNA (if applicable). Every BLAUBRAND® pipette is labeled with the following additional information; DE-M marking for all pipettes, waiting time in combination with calibration type in the format (Ex + 5 s), batch or serial number, and in case of USP pipettes the inscription USP.

What is the difference between the handling of bulb pipettes with one and two marks?

After aspiration of bulb pipettes with one mark the liquid has to be delivered excluding the small amount of residual liquid in the tip. After aspiration of bulb pipettes with two marks the liquid has to be delivered until the lower mark. Hence, you have to set the meniscus a second time correctly.

Can you explain the waiting time for pipettes?

The waiting time begins when the meniscus comes to rest at the lower volume mark or in the tip: During the waiting time residual liquid continues to flow down from the glass wall. You only have to consider the waiting time of 5 s for BLAUBRAND® pipettes (cl. AS) before you remove the tip from the inner surface of the vessel. For SILBERBRAND pipettes (cl. B) no waiting is prescribed.

Are pipettes calibrated according to 'TC, In' or 'TD, Ex'?

'TD, Ex': The delivered quantity of liquid corresponds exactly to the capacity indicated on the instrument.

How is the pipette used correctly?

Handling of pipettes: Fill pipette to approx. 5 mm above selected graduation mark Remove any liquid remaining on the outside with a tissue Set the meniscus Wipe off any drops of liquid Hold pipette vertically Align tip at inner surface of inclined vessel Deliver liquid and, after waiting time (necessary for cl. A or AS), draw the pipette tip upwards along the inner wall.

What kind of screening inks does BRAND use for printing the bulb or graduated pipettes?

Blue and white enamel are printed on the outer surface and provide a high contrast and an optimal combination of chemical resistance and legibility for BLAUBRAND (cl. AS) and SILBERBRAND (cl. B) pipettes. Amber diffusion stain is used for BLAUBRAND®-ETERNA (cl. AS) and SILBERBRAND-ETERNA (cl. B) pipettes. This color diffuses into the glass surface and can therefore only be removed by abrasion or glass corrosion. For a short overview of screening inks please look into section 'Silk-screening' of our brochure about 'Volumetric Measurement in the Laboratory'.

© 2019 BRAND GMBH + CO KG